Tag Archives: holiday

A Disappearing Turkey

To all of my American readers, I hope you have a Happy Thanksgiving this week! Brian Wolfe from Costume Armour sent me some photographs of a trick turkey they recently created, which seems apropos to the holiday.

For this trick, a waiter needed to walk in with a food cart. He lifts the lid off of a covered tray revealing a delicious roast turkey. He replaces the lid, and the next time the lid is removed, the turkey is gone. Instead, an actor’s head is on the tray, and the actor begins to speak.

This is the drawing he shared with me:

Drawing for a turkey trick
Drawing for a turkey trick

They needed a giant, oversized turkey with enough room inside to fit a head; it also needed to be light enough that it could be lifted along with the tray (you will see why in a minute). They had a rubber turkey in stock, but it was too small and heavy. So they decided to vacuum form a new one. They carved the turkey in foam, made a two-piece mold, and vacuum formed it in 0.04″ Kydex plastic.

Vacuum formed turkey halves
Vacuum formed turkey halves

They cut out the pieces, glued them together, and painted them. Next, they cut a large hole in the bottom:

Hole in the bottom of the turkey
Hole in the bottom of the turkey

The tray was also vacuum formed, this time in a heavy 0.093″ Kydex plastic with a metallic finish. The bottom was formed over a wooden mold, while the lid used a plaster mold. They also added some artificial lettuce which was bought.

Vacuum formed turkey
Vacuum formed turkey

A brass drawer pull completed the look to the lid. The small black rectangle next to it in the photograph below is a small toggle switch:

Tray Cover
Tray Cover

When the waiter flips this switch, a small battery-powered electromagnet turns on (shown in the next photograph). The turkey had a small piece of flat steel hidden on top which is grabbed by this magnet. So when the magnet is on and the tray lid is lifted, the turkey travels along with it, hidden from the audience’s view.

Battery and magnet
Battery and magnet

The diagram below illustrates how the whole trick was set up. I’ve seen this same basic principle carried out in a number of different ways, but the combination of the hollow turkey and electromagnet makes this execution especially elegant; you can control whether the turkey or head is visible simply by the flick of a switch. The actor underneath does not have to do anything.

Turkey trick diagram
Turkey trick diagram

Hope you enjoyed this! Have a Happy Thanksgiving!

Snow

Every winter, many performing arts institutions put on some kind of winter or holiday show. From a traditional Christmas Carol or The Nutcracker Suite, to the more modern A Christmas Story and The Santaland Diaries, many of these shows involve snow to some extant. Now, depending on the context of the snow and the traditions of the theater you work at, snow can be the responsibility of one or more departments: props, scenery, sometimes even lighting. Still, it doesn’t hurt to know some of the many ways snow is recreated, whether or not it ends up being the prop department’s responsibility.

For the 1936 Broadway production of Ethan Frome, scenic designer Jo Mielziner was very specific about the properties of the snow which covered most of the stage. It fell to Joe Lynn, the property master, to come up with a recipe. After much trial and error, they arrived at a mixture of white cornmeal, ground quartz and powdered mica flakes. As Mielziner himelf explains:

The cornmeal provided the right consistency, the quartz gave the crunching sound and the mica simulated the sparkling surface of snow in moonlight.

(from Designing for the theatre: a memoir and a portfolio, by Jo Mielziner; Atheneum, 1965, pg. 90)

Joe Lynn also added some rat poison to the mix to keep vermin away, which is probably not the safest solution available to today’s theatres. Also, using particles and powders as a floor covering—this is true of sand as well—can trigger issues with your fire marshal and even Actor’s Equity; you want to make sure you involve them as soon as possible so that you don’t end up using something which is not allowed.

For snowballs, previous props people have used white bar soap shaved into bits with a cheese grater. The resulting bits can be packed into a snowball which explodes on impact. Others suggest instant mashed potato flakes. In either case, water can be mixed in or spritzed on to make the snowballs stick better. If the actors are throwing the snowballs at people, obviously you want the snowball to break apart on impact as easily as possible. A lot of variables come into play: how hard the actor throws it, what it is hitting against, the temperature and humidity in your theatre, how far in advance you need to make the snowballs, etc. As a result of all these variables, there is no “exact recipe”, and research and development is essential.

Another option is the interior of disposable diapers (new ones, not used ones). They contain a powder called sodium polyacrylate, a polymer which absorbs 800–1000 times its own weight, effectively turning a liquid into a solid gel. It is also sold in magic shops and novelty stores as “slush powder”.

If a show calls for falling snow, it is often the props departments duty to procure the snow, while scenery is in charge of making it fall from the air. I know, it’s bizarre. The preferred method for at least the past hundred and thirty years is using clipped paper. Unfortunately, regular paper will not pass today’s fire retardant standards. If the thought of fire-proofing every snowflake for every performance is too overwhelming, theatrical suppliers, like Rose Brand, sell flame-proofed paper snow flakes. Expect to pay a lot though, and be aware that everyone needs snow during the winter and they are often sold out by this time of the year.

A more modern alternative is plastic flakes. Rose Brand sells these as well, but you can make your own if you wish. You can find paper shredders (for offices) which not only cut in strips, but also crosscut those pieces to make confetti. You can run white grocery bags or garbage bags through one to make your own plastic snow flakes. Bear in mind that you need a lot of snowflakes to make even a short-duration snowfall over a small stage. You’ll need more for multiple performances. You may be tempted to sweep as much as you can from one performance to use in the next one. Be aware that when you are picking up the old snow, you are also picking up all the dirt and dust from the stage. You don’t want to rain crud down onto your performers during a show; the dust can get in their eyes, and larger particles may even injure them when dropped from the top of the stage.